Roku Remote Blinking Green Light? Try These Easy Solutions

Have you ever attempted to use your Roku remote, but it didn’t work for whatever reason? The green light on the rear of your remote, it turns out, just indicates that the remote is unable to link with your Roku TV.

In this situation, resolving the issue is even simpler and less expensive. The majority of the time, situations like these may be readily resolved by doing basic troubleshooting.

In this article, you will find the solution you desperately need to fix this.

What Makes The Roku Remote’s Green Light Blink?What Makes The Roku Remote's Green Light Blink?

If you’re wondering why the Roku remote light blinks green, then you are at the right place. Several explanations are present, including:

It might be that your Roku remote is unable to link with your television, or that the Roku remote has simply ceased operating as it should.

Although a yellow flickering LED light on the Roku remote signals a pairing issue, a blinking green light might also be interpreted as a pairing issue. A flickering green light might potentially be the reason for poor signal reception or interruption. 

Check out this article on How to Pair Roku Remote without Pairing Button. This could also fix this issue.

When you have other devices near your Roku device or in the same space as your controller device, you may experience such disruptions. Additionally, if your Roku device’s battery or charge is low, your Roku controller device’s light may flicker green.

In most circumstances, however, when such an issue happens on your Roku remote, a notification will appear on your TV screen, alerting you to the problem as well as the source.

Solutions To Fix Roku Remote Blinking Green Light

1. Replace the Batteries In Your Roku Remote

Replace The Batteries In Your Roku

Even high-quality batteries eventually die. As a result, Roku remotes frequently glow green when they don’t have enough power.

Fortunately, Roku’s settings make it simple to see how much juice your batteries have remaining.

Here are the steps:

  1. Turn on my television as well as your Roku device.
  2. Then, navigate to the Roku’s home screen.
  3. Go to Remote & Devices > Remotes in Settings.
  4. Then, select Gaming Remote from the drop-down menu.
  5. Afterward, select the About option, which shows the battery level.

It’s time to replace your batteries if the percentage is less than 25%. Buy some AA batteries.

The following procedure should be followed to replace the batteries:

  1. Remove the remote’s rear cover.
  2. Then, remove the batteries that are already in place.
  3. Afterward, replace the old ones with the fresh ones you bought.
  4. Then, make sure they’re in the right spot.
  5. Lastly, return the remote control’s rear cover.

If the problem still persists, you can resort to some other solution.

2. Take Your Roku TV’s Power Cord Out

This solution has typically worked for many people, so it’s worth a go because it’s the next best thing to replace remote batteries.

I follow these steps, as explained in this video.

  1. To begin, ensure sure that the Roku TV is turned on.
  2. You’re probably wondering how you’ll switch on your TV if you don’t have a remote. On most TVs, there is an ON/OFF button on the bottom or side. Turn on television by finding the button.
  3. Then, remove the batteries from the remote whilst Roku TV is on.
  4. After that, unplug the television from its power source, which is generally a wall outlet.
  5. Wait for 30 seconds before plugging the TV back in and turning it on.
  6. After the TV has started up, replace the batteries in the remote and press the back button for about 10 seconds, or until the green light begins to flash again.
  7. The remote should link with your Roku TV, and notice should appear on your TV screen.

3. Perform A Hard Reset

This procedure is actually fairly simple and easy to carry out. All you have to do is follow the procedures outlined below, which I follow myself:

  1. To begin, leave the TV set turned on and remove the batteries from the Roku remote.
  2. Next, depending on the sort of connection you have set up, leave the TV set ‘ON.’
  3. Either unplug the Roku device from the television or totally turn off the TV at the source.
  4. After that, reconnect the batteries to the Roku controller.
  5. Set up the Roku stick or Set-top box as previously, and
  6. Turn on the power to the aforementioned device.

This method should fix the problem in most cases. 

4. Network Configuration

You’ll need a high-speed and stable internet connection to utilize Roku efficiently. As a result, if your remote is blinking green, it’s possible that your network settings have been interrupted.

Follow these steps below to fix this,

  1. Go to the router settings and enter the default credentials. 
  2. Then, select any stable internet connection from the settings, either 5GHz or 2GHz.
  3. After you have made your choice, save it.
  4. The modem or router should then be restarted. The flashing light will cease after your Roku has established a connection.

5. Utilize the Roku AppUtilize The Roku App.

If the techniques described above aren’t working, you can:

  • Download the Roku app.
  • The app is usual in that it could be used as a remote to change stations and even operate the Roku itself.
  • Another benefit of this app is that it has all of the features you’ll need to have a fantastic Roku experience.
  • When using this controller software, make sure your internet is up to date and running at full speed. Any less than this will cause the program to crash.

6. Get Rid of Any Obstruction

  • If you’re using an IR (Infrared) Roku Controller, any item between the IR transmitter on your controller and the receiver on your TV can prevent it from operating correctly.
  • As a result, it’s critical that you make sure there’s no item or hindrance between your remote and the TV when you’re using it.

7. Get in touch with Roku’s Technical Support

If you’re having trouble using the controller app because you’re having internet problems, the next step is to contact technical support.

  • They’ll utilize a variety of techniques to find out what’s wrong with your remote and why none of the troubleshooting options worked.
  • They’ll troubleshoot your device after you check in.
  • All of these are likely to address any outstanding issues.

Check out this article, if you are getting Low Power Error on your Roku.


A green flashlight denotes a variety of issues, and this is why there can’t be a single solution.

However, you can use these simple methods:

  • Change Batteries
  • Take Your Roku TV’s Power Cord Out
  • Perform A Hard Reset
  • Network Configuration
  • Utilize The Roku Controller App
  • Getting Rid Of Any Obstruction
  • Get in touch with Roku’s technical support


Why is the Light On My Roku Remote Flickering Green?

Your Roku remote’s flickering green light indicates that it is working to pair. Change the Batteries. Unplug the TV while it is turned on and wait 30 seconds. Reconnect the television.

What is the Procedure For Resetting My Roku Remote?

For around 5 seconds, press and hold the reset button, which is found in the battery compartment. The light should start flashing at this point. The re-pairing procedure may take up to 30 seconds to complete; when it is finished, a notification will display on the screen.

Why Isn't My Roku Control Working?

Remove the Roku from your TV or reboot the Roku box. Allow a minute for it to reconnect, then retest. Unplug the batteries from the remote, and wait a second before replacing them and retesting them. Replace the remote control’s batteries and retest the device.

Last Updated on January 15, 2024 by Shabarish Balaji

Shabarish Balaji
Follow Me

Leave a Comment