Is your television turned on, but there’s no picture? This is a fairly prevalent situation that affects many users, regardless of the manufacturer or model of their television.
First and foremost, ensure that your television is appropriately plugged in and switched on. The TV may “turn on,” but the screen stays blank.
If the television still doesn’t have an image, you’ll have to begin troubleshooting different problems to figure out what’s causing the problem.
Continue reading to find out what issues to search for and in what sequence.
In this article, I will address your query, “How to fix TV has sound but no picture?”
Reasons for a Black or Blank TV Screen
There might be several reasons why your TV screen is blank. They are,
1. Power Supply Board Failure
The most common cause of a blank screen is a problem with the TV’s power connection circuit.
T-con boards and similar interior parts are often located next to the power supply board.
Check your television with a different power source to confirm that the issue is with the power supply. The problem is solved by employing the power outlet rather than the TV.
2. Backlight Error
LCD TVs face this problem because they consist of a backlight. In case the backlight fails, you might not be able to watch any content on display.
3. TV Panel Issue
A broken TV panel will always lead to a blank screen. Nevertheless, two remedies exist for this problem: either buy a new TV or a new display.
4. Sleep Timer
In case the sleep timer is set, the TV may sleep automatically after the timer expires. It’s useful to know that you may cancel the timer in your TV’s configuration menu.
5. Bad Connections
The television screen might go black for a number of causes, including faulty connections as well as wiring.
Inspect the cords and the power supply to confirm that your TV is rightly connected.
6. Capacitor Issue
In case the capacitor fails, the screen won’t be equipped to display pictures or turn on.
7. Power Saver Mode
Several televisions include power-saving technologies that turn off the display while not in use. Although the screen is turned off, the viewer will continue to perceive some sound.
If you believe your television has this function, go into the settings and disable it.
Try These Easy Solutions to Fix Your TV Has Sound but No Picture
We’ve listed our top 5 solutions for fixing blank TV displays below.
1. Factory Reset
Follow the steps below to reset your television as follows.
How to Factory Reset Samsung TV?
Step 1: Click on the Home Button on your Remote.
Step 2: Select Settings.
Step 3: Select More.
Step 4: Scroll down and Select Support.
Step 5: Select Self Diagnosis.
Step 6: Scroll down and Select Reset
Step 7: Enter Your TV Pin. (Default Pin is 0000)
Step 8: You will get a Reset Warning Message, Select Yes.
You have now successfully factory reset your Samsung TV.
Check out the video tutorial if required.
How to Factory Reset LG TV?
Step 1: Press the "Settings" Button on your Remote.
Step 2: Scroll Down and Select All Settings.
Step 3: In All Settings, Select General.
Step 4: In General, Select System.
Step 5: In System, Select Reset to Initial Settings.
Step 6: You will get a warning message asking "Do You Want to Continue?", Select OK.
How to Factory Reset Sony TV?
Step 1: Click on the Home button on your LG TV Remote.
Step 2: In Home, Select Settings.
Step 3: In Settings, Select Storage & Reset.
Step 4: In Storage & Reset, Select Factory Data Reset.
Step 5: Once you click on Factory Data Reset, you will get an alert and Select Erase Everything.
Step 6: Select Yes.
2. Disable Power Saving or Energy Saving Mode
Check the television settings to see if the television is in power-saving or energy-saving mode. In case power saving is on, the display will switch off periodically while the audio is running.
As a consequence, if the television has this option, we suggest that you turn off the Power Saver as well as Energy Saver settings to avoid disruptions while watching.
To Disable Power Saving Mode follow the steps below.
Step 1: Click on Home Button on your remote.
Step 2: Goto Settings.
Step 3: In Settings, Select System.
Step 4: In System, Select Eco Solution.
Step 5: In Eco Solution, Select Energy Saving Mode.
Step 6: Turn Off.
Check out this video if you are looking for a detailed tutorial.
3. Replace the HDMI cable
If the TV turns black because of HDMI audio but no visuals, you may need to replace the HDMI cable.
HDMI cables are affordable and may be purchased both online and in shops.
Check out this PowerBear 4K HDMI Cable on Amazon.
4. Replace Your TV Power Board
If none of the following fixes help, you may have to change your television power board. You may change the power board of your television manually or have it serviced by a specialist.
It is highly recommended to hire professional help.
5. Verify the TV Connection
This is among the most basic hacks. Check the power as well as installation cables of your television to ensure that it is correctly placed and clear of loose cords.
Check that all connections are attached to the right ports, as shown below:
- Disconnect and switch off the television.
- After 15 to 30 minutes, connect it again.
- Click the power button on your TV and hold it for a few seconds.
- Turn the TV off, press and then hold your TV power button.
- Look at the television.
- It should resolve the issue of TV sound without a picture and restore the television back to life.
Have Audio But No Picture on Your Samsung TV? Try This!
Firstly, make absolutely sure that the TV’s audio and video outputs have been configured to the right ports. To do so with your TV, navigate to Settings > Source > TV. Change the connections if they are not correct.
This will resolve the blank screen issue and guarantee that you can still display menu options whenever you press the remote button.
If you are still unable to resolve this issue, you can attempt a few alternative solutions. One option is to change the source. For instance, if your television contains a DVD player, you must use DVD or Blu-ray player or try connecting Play Station or Xbox.
If you’re employing a cable, you need to adjust the source to a better resolution. You might also try disconnecting and reinserting the source to determine if the problem remains.
In case you still can not resolve the problem, you can attempt a factory reset. This will remove any restrictions that are blocking the image from showing. Wait for the entire 60 seconds before turning on your television again.
As you await this, try pressing the power button on the television for at least thirty seconds to check whether the problem has been resolved.
How Do You Repair A Plasma TV With A Blank Screen?
Your plasma TV may sometimes have a blank screen that is challenging to repair. It might be due to an outside source, like a DVD player.
If you’ve exhausted these options and still can’t come up with a solution, consider these simple fixes for a blank screen on your plasma television.
You might also attempt to disable any external sources. Unplugging them for a bit might help you address a short-term problem.
Review the settings on your television before attempting any of these remedies. The backlight adjustment on your plasma TV can sometimes produce a blank screen.
When you’ve attempted these suggestions and still receive a black screen, you should check the settings on your television. Based on your model, it might be a simple repair, or it could necessitate expert help.
First, navigate to the company’s help website. Most televisions will offer troubleshooting information and tutorials available online.
Many models feature self-diagnosis websites as well. You will have to enter your PIN. When you’re finished, the television might well be reset and therefore should function properly. The blank screen issue should be resolved after restarting the TV.
Conclusion
You’re bound to run into this picture display problem with your television at some point. This issue is simple to resolve. Therefore you can repair no picture on television without difficulty.
Nevertheless, there are a few things for which you should see a professional!
If the TV isn’t displaying any visuals, try the following fixes:
- Examine the power supply cables.
- Switch the television on and off again.
- Look for any faulty wiring.
- Search for malfunctioning backlights.
- Keep an eye out for power supply board problems.
- Disable any sleep timers as well as power-saving options.
Ultimately, there are several ways for your television to fail. To ensure that the remedy works effectively, you need first establish the reason. When nothing works, it’s time to get a new television.
FAQ
LED, LCD, plasma, as well as 4K TVs generally cost between $80 to $380. Display and light replacements, backlight maintenance, HDMI port fixing, and control board repairs are all common issues.How much will fixing a black screen on a TV cost?
Defective connections, broken cords, or idle power sources are the most likely causes of your TV’s problem. Furthermore, the difficulty might be caused by issues with the inputs, like a DVD player, TV box, or similar external sources.Why does the TV screen go black?
Last Updated on January 15, 2024 by Shabarish Balaji
I founded CrestaTech to share my insights through hands-on testing of devices.
Follow me on Twitter and LinkedIn for the latest updates, and feel free to share your feedback as we delve into the world of gadgets and smart home tech.
- Hisense TV Not Connecting to WiFi? Try These Easy Solutions - January 15, 2024
- Hisense TV No Sound? Try These Easy Solutions - November 28, 2023
- Hisense Roku TV No Sound? Try These Easy Solutions - October 29, 2023