The majority of Verizon customers are highly pleased with their service; however, like all ISPs, there are some issues that might arise from time to time.
You want a dependable and consistent internet connection. Any issues should be dealt with as quickly as feasible.
First of all, understating the meaning of all the Verizon Fios Router Lights is important so that you can then turn to different troubleshooting methods.
So, here are the meanings of the five different lights of the Verizon Fios Router.
| Verizon Fios Router Lights Color | Meaning |
| Red | Experiencing Trouble Connecting to the Internet |
| Blue | Indicates Pairing Mode |
| Yellow | Indicates Absence of Internet Connection |
| White | Indicates Everything is Working Well and Perfectly |
| Green | Indicates WiFi is disabled |
Verizon Fios White Light
The presence of a steady white light on your Verizon Fios router shows that it is turned on, connected to the internet, and working properly.
After you’ve set up your Fios router, you should notice a white light.
Verizon Fios Blue Light
When you push the WPS button on the front of your Verizon Fios router, a blinking blue light appears. Your router is in pairing mode, as indicated by this message.
A solid blue light will appear after a connection has been established, indicating that the pairing was successful.
A “WiFi Protected Setup” is initiated by pressing the WPS button on your router.
This is really a simple method of adding WPS-enabled devices to your Fios WiFi network.
- Utilize the WPS button on the router for a few seconds.
- When you click this button on your router, the light on the router will progressively flicker blue for up to two minutes.
- After the light becomes solid blue, the process has been completed.
Verizon Fios Red Light
If your Verizon router’s globe is solid red, it signifies the router is experiencing trouble connecting to the internet. If it’s flashing slowly, it’s indicating a problem with the gateway.
It can also flash very quickly, indicating that the router has overheated and requires cooling.
To troubleshoot this problem, all you need to do is to cool down the device by switching off the router for some time and then turning it back on.
Verizon Fios Green Light
The presence of green light on your Verizon Fios router indicates that WiFi has been disabled.
To fix this, go to the My Fios app and enter the network settings for your Fios router, then toggle the WiFi settings from on to off, back on, and then make the changes.
Verizon Fios Yellow Light
The absence of an internet connection is indicated by a solid yellow light on your Verizon Fios router.
You may try checking the internet connection and internet wires or rebooting the router if this happens.
Common Troubleshooting Methods For Verizon Fios Router
1. Result Of Incorrect Booting
When the yellow light on your Verizon Fios keeps flashing, signaling no internet access, you can try rebooting it.
The method to reboot the device has been discussed in this video.
- Simply switch off and on your Verizon Fios service for a minute.
- When you see a flicker of solid white light, it means your internet connection has been restored.
2. To Resolve Network Problems, Use The Troubleshooter
Have you been unable to identify the source of your Fios router’s yellow light?
Then, you may rely on the Troubleshooter to assist you. It can not only discover the problem but also suggest a remedy.
As a result, it’s a useful tool for resolving a variety of difficulties on Windows devices.
- Access your Network and Internet settings.
- To find the Network Troubleshooter, navigate to the Status area.
- Conduct a scan.
- In a relatively short amount of time, the Troubleshooter can locate and resolve difficulties.
- It can inform you how to fix it if it doesn’t work.
3. Reset The Router
If restarting the router does not fix the problem, the router must be reset.
- To do this, press and hold the reset button located on your router for half a minute.
- The operation will take some time to complete, and once it does, your internet access will be restored.
- When you reset your router, however, it will revert to factory defaults.
- But, before you go ahead and execute a factory reset, make sure you have all of your login credentials because you’ll need them to reinstall everything.
- Furthermore, there are certain advantages to resetting.
- It will clear all of the device’s unneeded cache data and halt any continuing attacks from malicious agents or hackers.
- People frequently connect to your Wi-Fi without your permission; restarting the WiFi will remove them as well.
4. Check To See If Your Verizon Router Is Getting Too Hot
Verizon router overheating can result in issues such as sluggish internet speed, internet interruption, and more.
- It’s advisable to let your router cool down in these cases.
- Simply turn off the router’s power supply.
- If your router has a backup battery or an inverter, unplug those devices as well.
- You may also relocate your Verizon router to a location with adequate ventilation to prevent it from overheating again.
5. Outages Can Be Seen On The Verizon Website
Verizon provides a Service Outage on their website where you may check to see whether your region is experiencing a service outage.
- Your location might be needed.
- If there is no problem at the service provider’s end, you can resort to other solutions.
6. Cords That Are Just Loosely Connected
Another reason for the Verizon Fios light blinking is because the cables connecting the router may not be correctly plugged.
- To test this, hold the wires together for a few moments.
- If the internet access returns, you must disconnect all necessary cables and re-plug them within a minute.
7. Problem with the Cables
The Verizon Fios Yellow Light flashing might potentially be the result of faulty wires.
- It might be because animals, such as a mouse, have chewed through the wire or because the wires have deteriorated over time.
- In each of these circumstances, the damaged Verizon Fios cable must be replaced.
8. Update Firmware
This is yet another suggested solution for the Fios router yellow light issue.
- Your router’s firmware is a critical component.
- If you use an out-of-date version, you’ll almost certainly run into issues.
- This can sometimes entail problems with the internet connection.
- As a result, you can’t rule out the possibility that your problem is caused by outdated firmware.
- On your computer, download a firmware update from your router’s official website.
9. Get In Touch With A Verizon Technician
If none of the following fixes the router blinking white problem or yellow light problem, you should contact a Verizon Fios expert since the problem might be a broken router or a faulty LED light.
- Additionally, the blinking white light might be caused by software or firmware issues on Verizon’s end, necessitating the intervention of a professional.
- As a result, many router problems are difficult to resolve on your own, and you don’t want to risk more harm to your router or other equipment.
Key Takeaways
Many individuals have been able to overcome this problem by following the advice in this article.
Outlined below are all the suggestions:
- Result Of Incorrect Booting
- To Resolve Network Problems, Use The Troubleshooter
- Attempt To Reset The Router
- Overheating
- Outages Can Be Seen On The Verizon Website
- Loose Connections
- Damaged Cables
- Update Firmware
- Get In Touch With A Verizon Technician
FAQ
If the internet light on your router is orange or amber, it means your network connection with your internet service provider (ISP) isn’t as strong as it might be.What Does My Verizon Router's Orange Light Mean?
Rebooting your network and PC will usually solve any Internet connection issues you’re having. To restart your computer and router, follow these steps: First, turn off the PC that is linked to your router. Switch on and off your router. What's The Deal With My Verizon Router Not Functioning?
It is an indication of data being sent and received. It should flicker faster while you’re doing stuff on the internet. It will blink in normal circumstances. This is referred to as a “keep-alive” signal.The LED On My Router Is Blinking, Why?
When the Fios router attempts to access another device, it blinks blue. The connection has ended in failure caused by weak signal strength if it proceeds to blink and does not glow a solid blue.What's The Deal With My Fios Router Blinking Blue?
A green light is an indication that you are connected to the IPS. A flickering green signifies that traffic is being transmitted; if it is not blinking, the connection is active, but no traffic is being transmitted.Is My Verizon Router Supposed To Be Glowing Green?
Last Updated on January 15, 2024 by Shabarish Balaji
I founded CrestaTech to share my insights through hands-on testing of devices.
Follow me on Twitter and LinkedIn for the latest updates, and feel free to share your feedback as we delve into the world of gadgets and smart home tech.
- Hisense TV Not Connecting to WiFi? Try These Easy Solutions - January 15, 2024
- Hisense TV No Sound? Try These Easy Solutions - November 28, 2023
- Hisense Roku TV No Sound? Try These Easy Solutions - October 29, 2023